Hydronic Hanging Garage/Shop Heater 50,000 BTU 2 speed blower fan w REMOTE THERMOSTAT AND SWITCH

Hydronic Hanging Garage/Shop Heater 50,000 BTU 2 speed blower fan w REMOTE THERMOSTAT AND SWITCH

$309.00

TWO WARRANTIES!!!

SKU: 2 speed 12x12 am unit heater thermostat and on off on switch Category:

Description

You are purchasing one 50k BTU unit heater WITH wireless remote-control thermostat and on off on switch. Perfect for garages, shops, green houses etc. They can also be hooked up to a “cold/chilled” water source to provide cool air as well! Can be mounted or set on shelf,bench, or floor.

Ports on the side as they should be, so you don’t have clearance issues if you want to hang them up close to the ceiling. Also, if you plumb the port closest to the fan as your hot supply, this will allow you top reheat and then super-heat the air as it passes through the water coil. We do not use a rheostat as these fan motors are not made for that application and can burn out your motor quickly.

There are TWO yes two warranties

Manufactures warranty: MFG defects – does not include freezing, rust, or corrosion leaks – shipping not included in warranty

Customer abuse warranty: If you freeze the unit, you can buy a replacement coil at a discounted rate -shipping not included in warranty

FACTS / Specs

Wireless thermostat

  • Temperature range 32 deg F – 158 deg F
  • Takes 2 triple A batteries ( not included )
  • Comes with wall mounted holder and table stand
  • Range – 20 yards in open area
  • Can be used for heating or cooling
  • Can be used in Fahrenheit or Celsius
  • Memory Function
  • USA plug style

Unit Heater

  • 9 ft. power cord plus 1 ft cord w/plus delivers optimal, safe AC power through a 14-Gauge heavy-duty cord (this allows you to choose if you want to use the 2 speed switch or just hard-wire on one speed.
  • replaceable 12×12 water to air coil inside
  • 2 speed capable or direct wire up one of the speeds if you don’t want to use the switch
  • US standard 1″ copper connections
  • Includes holes in top and bottom housing for bolts AS WELL AS mounting holes for for threaded rod for ease of installation (actual mounting rods and hardware NOT included)
  • Dimensions 15 3/4″ X 12″ X 13 1/2″ (LxWxD (including fan shroud)
  • Weight in box 27#
  • CFM chart below

uUjd1uh91u93m86PN+LDGinliaREQCWJpERAJYmkREAliaREQCWJpERAJYmkREAliaREQCWJpERAJYmkREAliaREQCWJpERAJYmkREAliaREQCWJpERAJYmkREAliaREQCWJpERAJYmkREAliaREQCWJpERAJYmkREAliaREQCWJpERAJYmkREAliaREQCWJpERAJYmkREAliaREQCWJpERAJYmkREAliaREQCWJpERAJYmkREAliaREQCWJpERAJYmkREAliaREQCWJpERAJYmkREAliaREQCWJpERAJYmkREAv4H4ZecnP89pvYAAAAASUVORK5CYII= - Wood Heating Solutions

SERVICE, SERVICE, SERVICE!!! Even after the purchase!

You can contact us with questions for our knowledgeable staff!

Available exclusively from Wood Heating Solutions.