To find out more about the Hyprotherm FL Series models, please look at the information below on this page.  If you have any other questions, do not hesitate to call our National Sales Team today at (800) 780-4302!

FL-085 (Heats Up To 2,300 Square Feet) – $7,397
FL-100 (Heats Up To 2,800 Square Feet) – $7,597
FL-185 (Heats Up To 5,182 Square Feet) – $7,997
FL-265 (Heats Up To 7,400 Square Feet) – $9,297
FL-300 (Heats Up To 8,400 Square Feet) – $10,297
FL-350 (Heats Up To 9,800 Square Feet) – $10,797

The standard insulation on our furnaces is:

2″ of Morgan Super Wool with an R value of 56.8 on the tops and fronts and 3″ of Knauf ET Blanket + 1/4″ of Solar Guard for a combined R value of 23.1 on the rest of the furnace

The cold weather package is R-88.23 on tops and fronts and 68.4 on the rest of the furnace and is available for an additional $325.00

You can find out more insulation information including video demonstrations by going to the insulation page.

Hypro Therm FL-185 Outdoor Wood Furnace

Inside Peek Of A Hypro Therm Boiler

Standard wiring and plumbing of a Hyprotherm furnace with the one included supply pump.
Standard wiring and plumbing of a Hyprotherm furnace with the one included supply pump.
Standard wiring and plumbing of a Hyprotherm furnace with the one included supply pump.
The two stage latch for fuel feed door.
Standard wiring and plumbing of a Hyprotherm furnace with no supply pump installed.
Standard wiring and plumbing of a Hyprotherm furnace with no supply pump installed.
Standard wiring and plumbing of a Hyprotherm L- series furnace one supply pump installed.
Shark bite connection for the built in potable hot water coil.
The two stage latch for fuel feed door.
The two stage latch for fuel feed door.
The two stage latch for fuel feed door.

Hypro Therm FL Series Videos